Keg System Hardware

Tailpiece - 1/4"

1/4 inch barbed nipple for beer shanks, keg couplers, etc. 1/4 inch barbs are typically used with homebrew systems running 3/16 and 1/4 inch inside diameter (ID) tubing. Made from 304 stainless steel.

Spanner Wrench

For installing and removing a faucet from a shank for cleaning. We encourage everyone who buys a faucet to buy a draft tool like this.

Short Plastic Faucet Handle - Without Insert

Standard black plastic faucet handle for draft systems.  The shorter knob type handle is also a popular option for keezers to prevent accidentally opening a tap while moving kegs in and out.

Faucet Plug W/ Washer

Used to cap off any American shank when faucet is not in place.  These are great items to have handy when a jockey box or kegerator is not being regularly used. The line cleaning kit can be found...

Corny Keg Rebuild Kit

Rebuild kit for 5 gallon Cornelius type kegs.Includes: 1 - Lid o-ring, 2 - Dip tube o-rings, 2 - tank plug (body connector) o-rings. Colors may vary.  

Tail Piece / Beer Shank Washer

Flat black washer/gasket for use on beer shanks and Sanke beer couplers.

Tailpiece - 5/16"

5/16 inch barbed nipple for beer shanks, keg couplers, etc. 5/16 inch barbs are typically used with commercial systems running 5/16 inch inside diameter (ID) tubing. Made from 304 stainless steel.

Pressure Relief Valve - Standard

The most common relief valve. Fits most Cornelius and Firestone style kegs. Long body with spring with grey top and pull ring. Max. pressure rating: 100 psi

Corny Keg O-ring

Round rubber o-rings for Cornelius keg lids.

Spherical Knob Plastic Faucet Handle

Spherical black plastic handle for beer taps

Relief Valve - Standard

The most common relief valve. Fits most Cornelius and Firestone style kegs. Long body with spring with grey top and pull ring. Max. pressure rating: 100 psi    

Ball Lock Beverage Out - Barb

BLACK LIQUID DISCONNECT WITH 1/4" BARB FOR BALL LOCK KEG

Ball Lock Gas In - Flare

GRAY GAS DISCONNECT WITH 1/4" MFL FOR BALL LOCK KEG

Ball Lock Gas In - Barb

GRAY GAS DISCONNECT WITH 1/4" BARB FOR BALL LOCK KEG

Ball Lock Beverage Out - Flare

BLACK LIQUID DISCONNECT WITH 1/4" MFL FOR BALL LOCK KEG

Swivel Nut & Stem - 5/16" barb, 1/4" FFL

5/16" Barb Stem x 1/4 FFL Nut

Tailpiece Hex Nut - Stainless Steel

1" Stainless Steel beer hex nut, used to attach a barb to draft equipment, either a shank or a keg tap. You will need a beer line gasket as well. Standard female beer thread 5/8" Top port...

Tap Handle Insert - Screw In

Create a taphandle of your very own and mount it with this easy to use threaded insert. Simply drill a 1/2" hole in the bottom of your wooden piece and thread the D1299 with a 3/8", 16...

Flat Washer for Inside Quick Disconnect

Replacement flat white washer for ball-lock and pin-lock quick disconnects. Fits inside the body of the QD when you unscrew the center shaft.

Pressure Relief Valve - Stainless Steel

Pin Lock Gas In - Barb

Plastic quick disconnects for pin lock Cornelius-type kegs. This is a high quality fitting made by CM Becker in Germany. Red and grey quick disconnects are used for the gas in tank plug.Barbed...

Pin Lock Beverage Out - Flare

Plastic quick disconnects for pin lock Cornelius-type kegs. This is a high quality fitting made by CM Becker in Germany.Red and black quick disconnects are used for the liquid out tank plug.1/4 inch...

Tap Handle Insert - Glue In

Glue in place threaded insert to create your own tap handle. 

Pin Lock Beverage Out - Barb

Plastic quick disconnects for pin lock Cornelius-type kegs. This is a high quality fitting made by CM Becker in Germany.Red and black quick disconnects are used for the liquid out tank plug.Barbed...